Dzenushko Dainis: Walking mechanisms survey
There are several basic types of "walking" mechanisms based on conversion of the rotational motion into the translational motion.
Contents
The Chebyshev Walking Mechanism
- Pafnuty Lvovich Chebyshev, the professor of St. Petersburg University invented and built the world's first walking mechanism and named it "The Plantigrade Machine". This mechanism, invented by Russian mathematician, has received the general approval at the World Exhibition in Paris, 1878.
The Klann Mechanism
- The Klann linkage provides many of the benefits of more advanced walking vehicles without some of their limitations. It can step over curbs, climb stairs, or travel into areas that are currently not accessible with wheels, but does not require microprocessor control or multitudes of actuators. It lays between these walking devices and axle-driven wheels.
That's a slick answer to a chgllenaing question
Creating a self-propelled platform based on the mechanisms of Theo Jansen
Watching the Theo Jansen mechanisms causes the desire to be able to ride on them (or to "walk"). So, I decided to create such a vehicle, which could move me (in a reduced scale, for the beginning). But if we want to ride it, first it should be able to turn left or right.
- How to achieve it?
It is possible to make two independent parts with two independent motors, and by controlling their speed and direction separately turn as any crawler does.
- Why this one is better than a wheeled vehicle?
If you're driving on sand or any loose terrain, the wheels may start to slip. But the walking mechanisms do not have this problem.
- What has been done?
Currently, the manufacturing process has been developed and debugged.
- How is it done?
This platform is created from acrylic, aluminum tubes, screws and nuts. In general, they are common materials. The materials chosen basing on the cheapness, the ease of use and aesthetic considerations. But it all started with a sketch of the parts in 1:1 scale. The sketches are presented below:
Then I had to deal with the first problem of this project, the friction. To decrease it, the simple slide bearings were made from aluminum tubes:
Here's how the first module looks like:
Here's how the first part looks like:
What is planned next?
1) manufacture the second module (DONE)
2) combine them (DONE)
3) mount motors(DONE)
4) develop a control system (DONE)
5) develop and install a remote control
06.10.11 at 23:58 the first successful launch of the combined mechanism had been performed Now the wired control system is set up. So that's what we have:
Walking mechanism 1.2
The next walking mechanism, now based on the Arduino platform, was assembled during the Summer Crash Course for pupils in FabLab Polytech held at the end of June 2013 under the supervision of Andrey Murachev and Dainis Dzenushko. The Arduino board control was performed from a computer using the Processing development tool. The program code for Arduino and Processing can be downloaded here.
